English > Products > Telecom Operation&Testing > FTTH Tool Kit > ST3110E Optical Fiber Cleaver

InformationParametersDownloads
Information

Structure:

Operating Procedures

  1. Open the top clamp lever and the lid of the single fiber adapter. The blade carriage should be in the forward position.

 

 

  2. Lower the fiber straight into the correct V-groove with the end of the fiber coating (e.g. if the cleave length is 16mm) at the 16mm mark on the ruler.

 

 

  3. Close the lid of the single fiber adapter.

  4. Lower the top clamp lever. Slide the blade carriage to the rear of the cleaver. The fiber will be cleaved.

 

 

  5. Open the top clamp lever. Then open the lid of the single fiber adapter and lift the newly cleaved fiber. Lift the off-cut and dispose it properly.

 

 

 

Ordering Information

Standard Accessory

Optical Fiber Cleaver with off-cut collector

1 pc

Carrying Case

1 pc

Operation Manual

1 pc

Optional Accessory

Replacement Blade

1 pc

 

 

Parameters

ST3110E Optical Fiber Cleaver

Suitable fiber

Single fiber

Coating diameter

0.25mm&0.9mm

Cladding Diameter

125um

Cleaving length

5~20mm

Cleaving angle

0.5°

Blade life

48000 times

Weight

Approx. 430g

Dimension

63(W ) X 84( D ) X 63( H ) mm

 

 

Downloads
kk棋牌官网 黑体彩6十1开奖结果 网赚兼职论坛 欧冠冠军列表 大嘴棋牌刨幺 股票投资特点 宝妈在家手机兼职 免费麻将游戏单机版 西甲联赛什么时候开始 大嘴棋牌斗地主 2014甘肃快3走势图