English > Products > Telecom Operation&Testing > FTTH Tool Kit > ST3110D Optical Fiber Cleaver

InformationParametersDownloads
Information

Structure:

 

 

 

  Cutting slider

  Pressure fiberboard

  Optical fiber fixture

  Blade body

  Fixed optical fiber mat

  Cover plate

  Blade

  III. Operating Procedures

  1. Open the pressure fiberboard and cover plate, put bare fiber in the fixture that was stripped coating (125mm/900mm), according to user’s requirement to ensure cutting length.

 

 

  2. Push to the front of the cutting slider (Figure), press and close the pressure fiberboard and cover plate to fix optical fiber.

 

 

  3. After close cover plate, ensure that the fiber is in a horizontal line.

  4. Push cutting slider back a one-time to finish cutting.

  5. Open cover plate and pressure fiberboard, then take out the fiber. In order to avoid damaging the fiber, fiber face don’t touch anything after take it out.

  6. After finish cutting, please clean up the broken fiber and don’t damage blade for later use.

Ordering Information

Standard Accessory

ST3110D Optical Fiber Cleaver

1 pc

Carrying Bag

1 pc

Operation Manual

1 pc

Optional Accessory

Replacement Blade

1 pc

Off-Cut Collector

1 pcs

 

Parameters

ST3110D Optical Fiber Cleaver

Coating Diameter

0.25mm&0.9mm

Cladding Diameter

125um

Cleaving Angle

0.5°

Blade Life

48000 times

Blade Face

16

Weight

Approx. 280g

Dimension(mm)

58X55 X 52

Downloads
kk棋牌官网 云南11选5直三遗漏 电玩城街机捕鱼 闲来湖南麻将手机版 捕鱼达人4破解版单机 开元电子棋牌游戏 河南体彩11选5开奖结果 甘肃11选5任五遗漏表 pk10开奖网站 加拿大快乐8和值 4887王中王鉄算盘开奖结果b 小说